shielded power inductors C MOS6020 document 287 -1 document 287-1 revised 09/02/15 inductance 2 dcr max srf typ 3 2 i sat (a) 4 i rms (a) 5 part number 1 20% (h) (ohms) (mhz) 10% drop 20% drop 30% drop 20c rise 40c rise MOS6020-222ml_ 2.2 0.035 110 2.86 3.26 3.56 3.0 4.1 MOS6020-332ml_ 3.3 0.046 85 1.90 2.28 2.46 2.6 3.6 MOS6020-472ml_ 4.7 0.050 60 1.46 1.82 1.94 2.3 3.1 MOS6020-682ml_ 6.8 0.078 55 1.32 1.56 1.72 1.9 2.7 MOS6020-822ml_ 8.2 0.085 45 0.94 1.18 1.30 1.7 2.3 MOS6020-103ml_ 10 0.092 36 0.79 0.95 1.06 1.6 2.2 MOS6020-153ml_ 15 0.130 30 0.83 0.95 1.03 1.3 1.8 MOS6020-223ml_ 22 0.182 22 0.79 0.92 0.97 1.0 1.4 MOS6020-333ml_ 33 0.290 20 0.57 0.67 0.74 0.80 1.1 MOS6020-473ml_ 47 0.420 16 0.45 0.56 0.62 0.50 0.7 MOS6020-683ml_ 68 0.520 15 0.37 0.45 0.51 0.45 0.63 MOS6020-104ml_ 100 0.800 13 0.35 0.40 0.44 0.40 0.56 MOS6020-154ml_ 150 1.28 10 0.26 0.30 0.33 0.35 0.49 MOS6020-224ml_ 220 2.00 8 0.22 0.26 0.28 0.30 0.42 MOS6020-334ml_ 330 2.84 7 0.18 0.22 0.24 0.25 0.35 MOS6020-474ml_ 470 4.40 5 0.15 0.17 0.19 0.22 0.29 1. when ordering, please specify termination and packaging codes: MOS6020-104m lc termination: l = rohs compliant matte tin over nickel over phos bronze. special order: t = rohs tin-silver-copper (95.5/4/0.5) or s = non-rohs tin-lead (63/37). packaging: c = 7 machine-ready reel. eia-481 embossed plastic tape (500 parts per full reel). b = less than full reel. in tape, but not machine ready. to have a leader and trailer added ($25 charge), use code letter c instead. d = 13 machine-ready reel. eia-481 embossed plastic tape. factory order only, not stocked (2000 parts per full reel). 2. inductance tested at 100 khz, 0.1 vrms, 0 adc using an agilent/ hp 4263b lcr meter or equivalent. 3. srf measured using agilent/hp 8753d network analyzer. 4. dc current at 25c that causes the specifed inductance drop from its value without current. click for temperature derating information . 5. current that causes the specifed temperature rise from 25c ambient. this information is for reference only and does not represent absolute maximum ratings. click for temperature derating information . 6. electrical specifcations at 25c. refer to doc 362 soldering surface mount components before soldering. designers kit c359 contains 3 of each value core material ferrite core and winding loss see www.coilcraft.com/coreloss terminations rohs compliant matte tin over nickel over phos bronze. other terminations available at additional cost. weight 0.21 g ambient temperature C40c to +85c with (40c rise) i rms current. maximum part temperature +125c (ambient + temp rise). derating . storage temperature component: C40c to +125c. tape and reel packaging: C40c to +80c resistance to soldering heat max three 40 second refows at +260c, parts cooled to room temperature between cycles moisture sensitivity level (msl) 1 (unlimited foor life at <30c / 85% relative humidity) failures in time (fit) / mean time between failures (mtbf) 38 per billion hours / 26,315,789 hours, calculated per telcordia sr-332 packaging 500 per 7 reel; 2000 per 13 reel; plastic tape: 16 mm wide, 0.3 mm thick, 12 mm pocket spacing, 2.5 mm pocket depth pcb washing tested to mil-std-202 method 215 plus an additional aqueous wash. see doc787_pcb_washing.pdf . ? 6.0 7.1 mm footprint; 2.4 mm high shielded inductors ? custom versions up to 4.7 mh are available.
document 287-2 shielded power inductors C MOS6020 typical l vs frequency typical l vs current document 287-2 revised 09/02/15 0.1 1 10 100 10000 1000 0.01 0.1 10 1 inductance (h) frequency (mhz) 2.2 h 10 h 470 h 100 h 0.1 10000 1000 0.1 1 10 current (a) inductance (h) 1 10 100 2.2 h 10 h 470 h 100 h 0.095 2,4 0.24 6,0 0.24 6,0 max max 0.268 6,8 max max 0.169 4,3 0.031 0,80 0.063 1,60 typ typ typ xxx 0.100 2,54 0.055 1,39 0.225 5,71 recommended land p attern dimensions are in inches mm
|